Izdelki za olje in (115)

It ensures the retention of dust and other light substances in the air coming from the cleaning machines. When the air containing dust coming from the dust aspirator is given tangentially to the cyclone, the dust in the air loses its speed as a result of cross-sectional expansion and falls by gravity, while clean air is discharged. Thus, the environmental impact of the air released outside the factory is minimized.

PMX 400

Grain drying machines can dry all kinds of wheat, corn, barley, canola, soybean, etc. It reduces the humidity level of grain plants to a level that can be stored in silos. With its perfect design, it has a drying capacity of up to 50 tons at 5 tons per hour. Our machines, made of superior quality stainless steel, are designed to serve for many years.

It is a carrier that allows raw materials and products to be transported horizontally and inclined to a certain degree in facilities such as feed, food, chemistry, fertilizer and soil.

PMX 1500

It ensures the cleaning of barley, rye, cracked wheat, vetch and black grass seeds in wheat. It performs this cleaning thanks to the sphere-printed sheet metal attached to the body with screws. As this sheet rotates, it separates the materials that will adversely affect the grinding in the incoming product, according to the diameter of the sphere pressure and the spiral angle given by the adjustment lever.

Ladders and platforms are produced completely modularly with galvanized sheets. Holes; It is drilled with the latest technology punching machines to facilitate screwing operations. Exterior and interior stairs; It can be joined to existing holes using fasteners. Standard silo external ladder safety system allows people to reach the roof safely. The rest platform is placed under the roof entrance cover for easy access to the roof or for your safety when entering the silo.

HANGAR

It is used to unload the products in steel or concrete silos. Thanks to the vibro motor, it provides discharge with vibration movement. Provides easy installation. It also ensures mixing of the product as it flows. The interconnection is made with rubber roving to prevent the silos from being exposed to vibration.

It is the place where carrier trucks dump the products for the storage of different raw materials. With the help of screws and elevators, the products poured here are delivered to the silos and pre-storage is provided. Sizes vary depending on the capacity of the factory and customer request.

These are conveyors used for general transportation purposes, in the horizontal or inclined transmission of a wide variety of products to different distances. Material transportation in belt conveyors is provided by the belt stretched between the tension drum and the drive drum, which is moved by a motor-reducer system. Belt selection is made according to the type of product to be transported and types such as PVC, polyurethane, rubber and mesh belts can be selected. It is suitable for transporting boxed, bulk and packaged products. It is the conveyor type with the widest usage area, and its usage capacity is also highly variable. Conveyor leg group and chassis are made of Aluminum or electrostatic powder coated steel construction.

Low pressure aspirators are used in industrial branches such as industrial establishments operating in the food sector, heating and ventilation facilities and the casting industry. Aspirators, whose models are determined according to their flow rate and pressure values, use different motor powers. It helps classify products with air, especially in the cleaning and processing of grains in the food industry.

Garbage separator machine is used to separate foreign grain products such as garbage and straw in wheat. The garbage purifier consists of two parts. Upper sieve part: It separates the large foreign substances in the wheat and throws them out. Lower sieve part: It eliminates small foreign substances from the wheat that pass through the upper sieve part and fall on it. Both screen wires can be easily removed and installed by hand. Wheat entering the machine from the product entrance is distributed smoothly and homogeneously on the sieve thanks to the vibromotor mounted on the center of gravity of the machine. The feeding box is oscillated with the body working by vibration on rubber wedges. With an adjustable flap, it ensures that the wheat is distributed across the entire sieve surface.

Control sieve is used in grain production facilities (flour mills, corn factories, etc.) to check the product before packaging. These are facilities with low capacity and space problems with a second purpose of use. Safes can be manufactured as 5 and 10 layers. It can be installed anywhere without any problems. WORKING PRINCIPLE It has its own suspension chassis. Thanks to the chassis, the sieve is mounted on the floor. The chassis on which it is hung has a solid construction. It works with a system driven from the bottom center of the sieve. It is operated by the electric motor mounted on the lower rear part of the machine. The swinging diameter of the sieve can be adjusted with the two-weight drive system.

Hulling machine is used to peel wheat. Separates foreign substances such as dust, sand and small seeds in wheat. It crumbles the soil and other adherent grains attached to the wheat grains, reduces the bacterial load, protects the wheat from bacteria and insects. Ours. It also enables the separation of grains that have not been separated from the spike. Wheat entering the machine from the wheat inlet section directly enters the wheat peeling section. Here, the wheat is husked by the rotation of the steel rotor, and the clean, hulled wheat is directed to the outlet thanks to the pallets on the rotor. The husks and dust separated from the wheat are thrown out of the machine with air through the holes of the steel braided wire on the rotor.

It is a machine that works with a fully compressed air system and is used to turn wheat coming from the cleaning unit into flour in flour factories. The chassis is made of sheet metal construction, and the sub-chassis is completely scanned on the borvek bench to ensure the parallelism of the balls. Rubber wicks are placed under the bed slides to absorb vibration. The properties of the rollers installed on the machine vary according to the diagram and are determined according to the purpose of obtaining the desired flour yield from the factory. All controls on the machine are made with the help of air stimulated valves and there is no electricity consumption. Depending on the amount of incoming product, the valves are stimulated, the pistons close and the grain balls come into action. Thanks to the plate on the grain rolls, the amount of product can be adjusted and flow is provided

Screw conveyors are used to transport grains and powder materials on the horizontal axis. Spiral sheets of different sizes are used depending on the purpose of use. Full spirals are used for transfer purposes only. We produce screw conveyors with capacities ranging from 5 tons/h to 500 tons/h.

CSI silo wall sheets have a minimum tensile strength of 900,000 kgf/cm2 (63,200 Psi). These values ​​clearly demonstrate our superiority over other silos in the market. ESI; offers strong, purposeful and durable commercial steel silos. Steel sheets made of very durable steel, wide corrugation spacings, heavy galvanized steel silo poles and matching roof gutters are some of the quality features available. Diameters of our commercial type steel silos; It has different dimensions from 4.57 m to 32 m. Extra different sizes are available in every diameter.

It is used for vertical transportation of wheat. It consists of two parts: lower and upper heading. Pipe length is adjusted according to the building height. The drive of the elevator is made by the reducer motor located on the upper head. The motor stand has slides and can be easily adjusted to enable shaft center adjustments. Belt tension is provided by the tensioning mechanism connected to the bearings.

Tube screw is used for horizontal transportation of products in flour factories. It is generally used for horizontal, inclined, right and left rotation transportation of flour and bran. The screw mounted at the outlet of the flour and bran silos is connected to the bottom of the rotoflow machine. It is possible to manufacture in various sizes. It is manufactured in different diameters and lengths. It can be made in right or left orientation according to the place where it will be used. It is used in distribution, collection, mixing and wheat tempering operations.

It is used to break protrusions in flour factories. Başak, kapçı etc. Used to break protrusions. Machine hammers and fan work coupled to the engine. The broken product is carried to the desired location by the fan. The crusher fan has a maximum sending height of 50 meters. The machine's feeder tank and the cyclone it will use are supplied with the machine. Body thickness is 4 mm, blades are made of special manufacturing steel. The machine is static balanced and operates silently.

Security structures must be present in all grain storage systems. The main ones are elevator towers, walking paths and their maintenance-rest platforms and security cages. All these materials and equipment are produced in galvanized form. Our security structures, which have many different designs, are offered in a wide range of sizes. All structures are produced taking into account factors such as height and wind speed. Our design team offers the most ideal solutions for security structures according to your budget and needs. Çukurova Silo's grain tanks will serve you for many years as they are produced according to high quality and safest designs.

It collects the flour from all exits of the sieve and delivers it to the flour container via pneumatics. Flour inlets are made with separate flour inlet valves. The valves lower the incoming flour into the spiral part. From here, it is directed to the outlet section via a spiral. Since the flour is covered with hair on the spiral, dust formation is prevented. There are ventilation holes at a certain point in this closed sheet metal. The spiral legs are made of rectangular profile. The helix of the gearmotor is located on the side of the outer body and is fixed to this side with the motor stand. There are rubber inspection covers on each flour flap.

It is a technique of adding the material to be mixed into the feed by microdosing.

Our chain conveyors are designed to be used for many years and in many different application areas. Our chain conveyors, produced entirely from galvanized and superior steel sheets, are used to transport grain horizontally in grain storage systems. Many different application options are offered, depending on the field conditions and your needs. The right conveyor system for you is produced from 5 tons to 500 tons/hour depending on the condition, field conditions and capacity of your grain.

DISC DIAMETER is 660/520/420 mm. CHEWING WIDTH .228 mm TOTAL WIDTH .290 mm PALLETLING AREA .4727cm2 DISC WITH CONICAL RINK AND BOLT INTERNAL SPEED .6,9 m/secROLL DIAMETER .320 mm.ROLL WIDTH .232 mm DOUBLE ROLLER .BELT PULLEY TRANSMISSION and TWIN MOTOR 15* 15 TOTAL 30 PIECES V BELT DRIVEN MAIN MOTOR 2 PIECES 110 KV 1000 rpm .PELLET CELL 304 QUALITY STAINLESS STEEL PELLETIZING CELL SAFETY SWITCH .FIXED MAGNET .1 PIECE CHROME STEEL XT 86,day WITH DRILLING METHOD DRILLED VACUUM HARDENED AND TURNED-ISO 9002 QUALITY CERTIFIED PELLET PRESS DISC 1 SET COMPLETE ROLL.

Ability to instantly monitor the efficiency of products in factories Ability to monitor the efficiency of products at certain time intervals Precise weighing with stainless steel loadcells PLC based control and data evaluation Ability to monitor all data from the computer Possibility of historical reporting Graphical efficiency reports Ability to add as many scales to the system as desired Efficiency calculation according to input and output Alarm in case of out-of-tolerance measurements

IT PROVIDES THE MIXTURE OF DIFFERENT PRODUCTS IN A HOMOGENEOUS WAY. THE BODY IS MADE UP OF 4-5 mm SHEET AND HAS A SINGLE-SHAFT SUDDEN DISCHARGE FROM A THICK-FLAXED PIPE. FILLING IS DONE FROM THE TOP AND THE PRESSURE BALANCE DURING FILLING IS MAINTAINED BY AN AIR PIPE. BOTH THE LOWER AND THE UPPER COVERS ARE PINEMATIC CONTROLLED AND THE OPERATION OF THE ROTOR IS PROVIDED BY A REDUCER. THE OUTPUT OF THE REDUCER AND THE OUTPUT OF THE MIXER ARE DIRECTLY COUPLED. A DOUBLE SPIRAL LEAF IS ALIGNED ON THE MAIN SHAFT IN ORDER TO MAKE THE RAW MATERIAL TO BE MIXED IN A HOMOGENEOUS FORM DURING THE MIXING.

Forced annealing; It is used in flour manufacturing facilities to provide high moisture content to wheat in a shorter time and with less water. It is used to give intense and standard tempering to wheat. The wheat to be moistened enters the machine inlet in an automatically controlled manner. Water inlet is controlled by an electronic or mechanical flowmeter. Wheat and water enter the machine at the same time. Provides 5% annealing even at the shortest distance. Forced annealing; It is designed to add (temper) the highest amount of water to wheat. The main bodies, made entirely of metal, are easily removable. The rotor consists of many distributor pallets on it. - Wheat and water are mixed throughout the body thanks to the pallets on the rapidly rotating rotor. With this feature, it performs the annealing process at the desired rate by applying strong rubbing, rubbing and forcing to the wheat. It is possible to reach high capacities with this machine.

VIBRO SCREEN